DEFECTOSCOP TCM

Mobile testing device for universal eddy current testing

Conventional eddy current testing in impedance plane view. The DEFECTOSCOP TCM module uses all typical parameters of a universal eddy current tester and displays the measurement data in the impedance plane.

A user working in expert mode can easily customize the list of available parameters and store them in the test program. Additionally, favorites can be defined so the module starts up quickly the next time. Switching from expert mode back into operator mode locks the parameter list and system settings for editing, saving time and effort.

Optionally, multiple frequencies can be added to the test program so that parallel testing can be carried out at different eddy current penetration depths. The color representation of the frequencies can be adjusted as desired.

Recordings of spinning components or hand-held rotating probes can be displayed directly in a high-resolution C-scan, allowing the test area to be easily evaluated and fully documented. Or, the raw data of the eddy current signal can be recorded and exported for later evaluation on the workstation computer.

Product highlights

Your advantages at a glance

  • Eddy current testing with rotating, HF, LF applications, etc. to solve a wide variety of test tasks, either using your own sensors or sensors adapted by FOERSTER
  • C-scan: data from a hand-held rotating probe can be displayed in a high-resolution C-scan
  • Multi-frequency inspection with up to 8 frequencies to check at different material depths for discontinuities in a single pass, or to reduce interference via frequency mixing
  • Post-processing of "frozen" eddy current data: freeze an eddy current signal and then edit parameters such as gain, phase, high-pass and low-pass filters
  • Flexible probe selection: connect a wide variety of sensors, such as parametric, transformer or bridge probes

Technical information

Frequency range: 4 Hz – 20 MHz adjustable in 1 Hz steps
Multi frequency:

Up to 8 frequencies in parallelMix two frequencies
Max output current: 400 mA (peak)
Charts:

x/y, t, x/y + t, C-scan
Thresholds: Lines, circle, box, sector
Freeze mode: Freeze your signal and adjust parameters like gain and phase

Accessories

Reference standard crack standards - flat (plate)

Defect standards for testing for cracks

Reference standard defect standards - Borehole

Reference error for testing bores with rotary probe

Recalibration of mobile products

Recalibration guarantees the accuracy and quality of your test and measurement values

Downloads

Flyer TCM 2.142 — 2 MB Mobile universal device for non-destructive eddy current testing

Related products

ECA TCM

Extension of universal eddy current testing for testing large surfaces

SIGMATEST TCM

New generation portable meter to measure the electrical conductivity of non-ferromagnetic metals